[Subject]
CAR AUDIO EXPERTS! HELP!!?
[Question]
Can i put these together?
AMP:
1000 watt amp
2 channel
2 X 250W RMS @ 4 Ohms
2 X 500W RMS @ 2 Ohms
1 X 1000W MAX @ 4 Ohms Bridged
2 Subs:
peak: 1500 Watts each
RMS: 500 Watts each
and i dont know if to get them dual 2 Ohms each or dual 4 Ohms each sub?
[All Answers]
If you want the max power you need to run the amp at 2 ohms.
See the link below for more answers:
http://www.rockfordfosgate.com/rftech/woofer_wizard.asp
To match those subs with that amp, get the dual 4-ohm version of the subs. Then you can either wire each sub for 2 ohms and run the amp in 2-channel mode, or wire each sub for 8 ohms, and wire them to the bridged amp in parallel for a 4-ohm load.
get the 4 ohm searies parllel ull get a 2ohm load x2
CAR AUDIO EXPERTS! HELP!!?
[Question]
Can i put these together?
AMP:
1000 watt amp
2 channel
2 X 250W RMS @ 4 Ohms
2 X 500W RMS @ 2 Ohms
1 X 1000W MAX @ 4 Ohms Bridged
2 Subs:
peak: 1500 Watts each
RMS: 500 Watts each
and i dont know if to get them dual 2 Ohms each or dual 4 Ohms each sub?
hernlu01 @ 2009-02-28 09:16:44
[All Answers]
If you want the max power you need to run the amp at 2 ohms.
See the link below for more answers:
http://www.rockfordfosgate.com/rftech/woofer_wizard.asp
RubiCrawler_LJ @ 2009-02-28 09:30:06
To match those subs with that amp, get the dual 4-ohm version of the subs. Then you can either wire each sub for 2 ohms and run the amp in 2-channel mode, or wire each sub for 8 ohms, and wire them to the bridged amp in parallel for a 4-ohm load.
kaezoo @ 2009-02-28 09:36:52
get the 4 ohm searies parllel ull get a 2ohm load x2
fukitolman @ 2009-02-28 09:49:38
[Subject]
Amp has enough power?
[Question]
Hey im planning on getting 3 of these subs(http://www.sonicelectronix.com/item_9922_Orion+HCCA+10.2+-HCCA10.2-.html) and this amp (http://www.sonicelectronix.com/item_17599_Hifonics+BXi+2610D.html)
Im pretty sure this is almost enough power for them, so am i right? and im also pretty sure this amp can be hooked up to 3 of those subs...if im wrong correct me please. THANKS!
[All Answers]
it will push the subs but your going the have an offset ohm load because of the 3hird sub see attachment http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=42
why get 3 of them? you need an amp that puts out 4500 rms watts @ 3 ohms if you wanna wire everything correctly and have them hit and be loud.
so you want an amp that can put out about 5000 rms @ 2 ohms
wire them like this
http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/3DVC_2-ohm_mono.jpg
it will present a 3 ohm load, which will be giving each sub the amount of watts it needs, between 4000-4500 rms total @ 3 ohms if you get an amp that does 5000rms @ 2 ohms
have fun spending a fortune, you dont want 3 of those subs
Amp has enough power?
[Question]
Hey im planning on getting 3 of these subs(http://www.sonicelectronix.com/item_9922_Orion+HCCA+10.2+-HCCA10.2-.html) and this amp (http://www.sonicelectronix.com/item_17599_Hifonics+BXi+2610D.html)
Im pretty sure this is almost enough power for them, so am i right? and im also pretty sure this amp can be hooked up to 3 of those subs...if im wrong correct me please. THANKS!
extremepb319 @ 2009-02-28 09:47:11
[All Answers]
it will push the subs but your going the have an offset ohm load because of the 3hird sub see attachment http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=42
fukitolman @ 2009-02-28 10:06:40
why get 3 of them? you need an amp that puts out 4500 rms watts @ 3 ohms if you wanna wire everything correctly and have them hit and be loud.
so you want an amp that can put out about 5000 rms @ 2 ohms
wire them like this
http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/3DVC_2-ohm_mono.jpg
it will present a 3 ohm load, which will be giving each sub the amount of watts it needs, between 4000-4500 rms total @ 3 ohms if you get an amp that does 5000rms @ 2 ohms
have fun spending a fortune, you dont want 3 of those subs
edwards1337 @ 2009-02-28 10:25:10
[Subject]
Is there a service/monthly fee with built in navigation systems?
[Question]
[All Answers]
No. No monthly fees.
The only future cost would be updating the map/roads/points of interest data base. But this is optional.
Depending on the device, it could be every year or every other year, etc.
There are some GPS units that include weather and/or traffic that DO require monthly fees.
Also, many aviation GPS units require updates every 29 days.
If it is simply a basic automotive GPS, there will be no recurring fees.
EDIT: My car has a built-in GPS. The update is optional and requires only the purchase of a new DVDROM. No labor involved.
(Though, it is about $140)
Yes and No!
Beware that most systems with up to the minute traffic updates charge a monthly fee and require cell service for these updates.
Most systems also require yearly updates for their maps at an additional cost. The can be as much as $100 and some nav systems need to be installed by the dealer at their over priced labor costs.
Do yourself a favor and ask them up front for these charges and compare them to the cost of a portable dash mounted unit.
9 times out of 10, you will be better of with a portable unit.
Good luck!
Is there a service/monthly fee with built in navigation systems?
[Question]
dscottyg @ 2009-02-28 09:45:17
[All Answers]
No. No monthly fees.
The only future cost would be updating the map/roads/points of interest data base. But this is optional.
Depending on the device, it could be every year or every other year, etc.
There are some GPS units that include weather and/or traffic that DO require monthly fees.
Also, many aviation GPS units require updates every 29 days.
If it is simply a basic automotive GPS, there will be no recurring fees.
EDIT: My car has a built-in GPS. The update is optional and requires only the purchase of a new DVDROM. No labor involved.
(Though, it is about $140)
Skyhawk @ 2009-02-28 09:55:42
Yes and No!
Beware that most systems with up to the minute traffic updates charge a monthly fee and require cell service for these updates.
Most systems also require yearly updates for their maps at an additional cost. The can be as much as $100 and some nav systems need to be installed by the dealer at their over priced labor costs.
Do yourself a favor and ask them up front for these charges and compare them to the cost of a portable dash mounted unit.
9 times out of 10, you will be better of with a portable unit.
Good luck!
RubiCrawler_LJ @ 2009-02-28 09:57:58
[Subject]
should i get an alarm?
[Question]
my car is a 1986 honda civic its a little rusty but i've got an alpine amp and 10 inch sub the whole stereo cost me $1,300 so should i get an alarm for my stereo and i think i,d be funny just to make my car beep like that
[All Answers]
alarms just anoy people keep it locked and get comprehensive insurance to protect your stereo
well a car alarm isn't gonna stop someone from ripping that out in 20 secs. best bet is to keep your receipts for insurance purposes so you can be reimbursed for the stolen items if they get stolen. Don't draw attention to yourself by bumpimg your music near where you live.
should i get an alarm?
[Question]
my car is a 1986 honda civic its a little rusty but i've got an alpine amp and 10 inch sub the whole stereo cost me $1,300 so should i get an alarm for my stereo and i think i,d be funny just to make my car beep like that
coolmandarek @ 2009-02-28 10:06:43
[All Answers]
alarms just anoy people keep it locked and get comprehensive insurance to protect your stereo
dcmich1115 @ 2009-02-28 10:14:16
well a car alarm isn't gonna stop someone from ripping that out in 20 secs. best bet is to keep your receipts for insurance purposes so you can be reimbursed for the stolen items if they get stolen. Don't draw attention to yourself by bumpimg your music near where you live.
stonekingsinc @ 2009-02-28 10:18:13
[Subject]
2000 watt 2 channel amp?
[Question]
if i have a 2000 watt 2 channel amp does that mean that each channel gets 2000 watts each or does it split the wattage so each channel gets a 1000 watts?
also what is rms
[All Answers]
split it
and im sure that amp is MAX power
not rms
so its really not gonna be 2000 watts..
cheaper amps try to sell you on the max watts if it says 2000 watts its probly 500x2 rms if ur luckey. check w/ manual or manufacter on rms watts and if its stabe at 2 ohms
2000 watt 2 channel amp?
[Question]
if i have a 2000 watt 2 channel amp does that mean that each channel gets 2000 watts each or does it split the wattage so each channel gets a 1000 watts?
also what is rms
GRAAAAA @ 2009-02-28 08:53:20
[All Answers]
split it
and im sure that amp is MAX power
not rms
so its really not gonna be 2000 watts..
p54 @ 2009-02-28 08:56:53
cheaper amps try to sell you on the max watts if it says 2000 watts its probly 500x2 rms if ur luckey. check w/ manual or manufacter on rms watts and if its stabe at 2 ohms
fukitolman @ 2009-02-28 09:54:12
No comments:
Post a Comment