[Subject]
I want to take out my mums old cassete radio from her car WITHOUT the removal keys?
[Question]
It is the DIN style keys I think, but I dont have them! Anything I can use instead?
[All Answers]
Once you remove it the codes will be lost, and you will have to take it to a specialist to get it working again. It isn't worth it.
brute force and ignorance does the trick lol.
use a flat head screwdriver mate, that's wat the crooks do!!
coat hanger
If it is the type with two holes ether side get a wire coat hanger and cut two lengths make the cuts at an angle , then bend each length into a u shape equal to the holes in the radio push the u shape wires in the holes at both sides : : and pull the radio out.
^
I want to take out my mums old cassete radio from her car WITHOUT the removal keys?
[Question]
It is the DIN style keys I think, but I dont have them! Anything I can use instead?
Mastersmithson @ 2009-03-29 05:57:21
[All Answers]
Once you remove it the codes will be lost, and you will have to take it to a specialist to get it working again. It isn't worth it.
Daniel D @ 2009-03-29 06:00:47
brute force and ignorance does the trick lol.
lee la dart @ 2009-03-29 06:01:55
use a flat head screwdriver mate, that's wat the crooks do!!
darren h @ 2009-03-29 06:13:13
coat hanger
Brian C @ 2009-03-29 06:17:15
If it is the type with two holes ether side get a wire coat hanger and cut two lengths make the cuts at an angle , then bend each length into a u shape equal to the holes in the radio push the u shape wires in the holes at both sides : : and pull the radio out.
^
J R @ 2009-03-29 06:32:21
[Subject]
Ford Keycode Request?
[Question]
I've just changed the battery on my Mondeo tried entering the keycode in my owners wallet and low and behold it doesn't work. Guessing its not the original stereo in there from new.
Can anyone help me out please?
serial: M161477
Thanks
Have taken the stereo out to check that the code was written anywhere on the unit, but it isn't :(
[All Answers]
Hi pull the stereo out , 2 bent coat hangers and you might have the Digits on the stereo itself
go on preloved and look up radio de codes there are loads of guys who will email you for free,ford charge a fortune to do it,fords are the easiest radios top decode!
Ford Keycode Request?
[Question]
I've just changed the battery on my Mondeo tried entering the keycode in my owners wallet and low and behold it doesn't work. Guessing its not the original stereo in there from new.
Can anyone help me out please?
serial: M161477
Thanks
Have taken the stereo out to check that the code was written anywhere on the unit, but it isn't :(
Jodie W @ 2009-03-29 09:50:53
[All Answers]
Hi pull the stereo out , 2 bent coat hangers and you might have the Digits on the stereo itself
jacqueline g @ 2009-03-29 10:02:47
go on preloved and look up radio de codes there are loads of guys who will email you for free,ford charge a fortune to do it,fords are the easiest radios top decode!
alexdonnanicola @ 2009-03-29 10:13:56
[Subject]
1994 Toyota Camry Radio Install?
[Question]
I have a 1994 Toyota Camry 2 Door Coupe. The first after market radio i put in the car i used a wiring harness. But when the ding dong that stole it took it they cut the wires all the way down to the factory wires. So i have bought a new radio but i cant figure out for the life of me which wires go to what they are all different colors and don't seem to have any pattern. If anyone has any suggestions or knows what wires are what please help.
Thanks Justin = )
[All Answers]
red hot black ground other wires wil be speaker like gray green yellow blues any stripe wires you can pretty much guess hook up hot or red and maybe ground radio turn on touch speak wire to what wires you have left you hear sound try typing how to rewire radio or how to instal radio most of time the wiring wil be same colors red hot black ground
google Camry wiring harness
Look in your manual.
Get a Chilton's manual on 94 Camry's at auto parts store.
1994 Toyota Camry Radio Install?
[Question]
I have a 1994 Toyota Camry 2 Door Coupe. The first after market radio i put in the car i used a wiring harness. But when the ding dong that stole it took it they cut the wires all the way down to the factory wires. So i have bought a new radio but i cant figure out for the life of me which wires go to what they are all different colors and don't seem to have any pattern. If anyone has any suggestions or knows what wires are what please help.
Thanks Justin = )
cnx_justinlc @ 2009-03-29 06:56:53
[All Answers]
red hot black ground other wires wil be speaker like gray green yellow blues any stripe wires you can pretty much guess hook up hot or red and maybe ground radio turn on touch speak wire to what wires you have left you hear sound try typing how to rewire radio or how to instal radio most of time the wiring wil be same colors red hot black ground
kelly_f_1999 @ 2009-03-29 07:02:54
google Camry wiring harness
Look in your manual.
Get a Chilton's manual on 94 Camry's at auto parts store.
gldnbuddy @ 2009-03-29 07:07:51
[Subject]
How do you hook up a poer inverter directly to the car battery and drive at the same time?
[Question]
The only way an xbox 360 can be played in a car is if the power inverter is hooked up directly to the battery using the clamps (red and black). As far as I knew, i thought you could only do this by lifting up the hood, but I'm no mechanic. Anyway, me and my brother want to be able to play the 360 in the backseat of the car while my dad drives. Any suggestions?
[All Answers]
dude why are you hooking this up directly to the battery?
if you really want to hook this thing up (use a fuse first of all), and just wire it to the accessory wire at the ignition if you really want to use some larger power, but that is un needed really
just go behind a cigarette lighter, solder on the connections and run your inverter wire from there (cut the inverter chord open right, dont just plug it into the plug, run it behind the dash)
With as much power as the 360 and a monitor uses, probably a good 250 watts together, you'll definitely want to run a power cable straight to the battery. If you hook it to another power source like the cigarette lighter, the cigarette lighter's fuse will just blow & you wouldn't be able to use it anyway. For something like running a cable to the battery, an auto parts store can usually show you exactly how to run it. You'd need a special battery terminal and some longer cable.
How do you hook up a poer inverter directly to the car battery and drive at the same time?
[Question]
The only way an xbox 360 can be played in a car is if the power inverter is hooked up directly to the battery using the clamps (red and black). As far as I knew, i thought you could only do this by lifting up the hood, but I'm no mechanic. Anyway, me and my brother want to be able to play the 360 in the backseat of the car while my dad drives. Any suggestions?
Cedric L @ 2009-03-29 07:55:05
[All Answers]
dude why are you hooking this up directly to the battery?
if you really want to hook this thing up (use a fuse first of all), and just wire it to the accessory wire at the ignition if you really want to use some larger power, but that is un needed really
just go behind a cigarette lighter, solder on the connections and run your inverter wire from there (cut the inverter chord open right, dont just plug it into the plug, run it behind the dash)
yeshewa @ 2009-03-29 08:58:27
With as much power as the 360 and a monitor uses, probably a good 250 watts together, you'll definitely want to run a power cable straight to the battery. If you hook it to another power source like the cigarette lighter, the cigarette lighter's fuse will just blow & you wouldn't be able to use it anyway. For something like running a cable to the battery, an auto parts store can usually show you exactly how to run it. You'd need a special battery terminal and some longer cable.
Bill D @ 2009-03-29 10:52:21
[Subject]
What are the most powerful and best sound quality 10" sub woofers available?
[Question]
I have a 3000w rms amp at 2ohms I want to get one or two 10"s for. I was looking at the T2 from RF 1600w max. I also noticed that Orion makes a pretty savage 10" sub at 3000w max. I just wanted to know if there were any other 10" subs that are in the same league as these types without getting into $10,000 handcrafted subs.
[All Answers]
Check out Ground Zero's line of subs - A guy I used to know used 6 15" Nuclears in his competition car.
http://www.ground-zero-audio.com/english/05_subwoofer.htm
sounds like your a bit above me, but i have run diamond audio in several cars and NEVER been disappointed in the kind of response the subs have.
i am impressed with the sq of "crystal" subs as well.
What are the most powerful and best sound quality 10" sub woofers available?
[Question]
I have a 3000w rms amp at 2ohms I want to get one or two 10"s for. I was looking at the T2 from RF 1600w max. I also noticed that Orion makes a pretty savage 10" sub at 3000w max. I just wanted to know if there were any other 10" subs that are in the same league as these types without getting into $10,000 handcrafted subs.
DarkRider @ 2009-03-29 08:38:21
[All Answers]
Check out Ground Zero's line of subs - A guy I used to know used 6 15" Nuclears in his competition car.
http://www.ground-zero-audio.com/english/05_subwoofer.htm
la_jarden @ 2009-03-29 08:50:22
sounds like your a bit above me, but i have run diamond audio in several cars and NEVER been disappointed in the kind of response the subs have.
i am impressed with the sq of "crystal" subs as well.
yeshewa @ 2009-03-29 08:54:15
No comments:
Post a Comment