This microphone amplifier circuit is very simple, consisting of two levels. with wide dynamic regions, small noise, and can with a long cable about 50 meters. The battery supply is a good compromise: in this Manner The input circuit is free from mains low frequency hum pick-up and connection to The amplifier is more for simple, of due To The absence of mains cable and power supply. Using a stereo microphone the circuit must be doubled. In this case, two separate level controls are better than a dual-ganged stereo potentiometer. Low current drawing (about 2mA) ensures a long battery life.
For better results use Enclosing the circuit in a metal case is highly recommended. output circuit of this microphone can directly connect to the Aux input of your amplifier through screened cable and suitable connectors.
List Component
P1: 2K2 Potentiometer
R1,R2,R3: 100K 1/4W Resistors
R4: 8K2 1/4W Resistor
R5: 68R 1/4W Resistor
R6: 6K8 1/4W Resistor
R7,R8: 1K 1/4W Resistors
R9: 150R 1/4W Resistor
C1: 1uF 63V Polyester Capacitor
C2,C3,C4: 100uF 25V Electrolytic Capacitors
C5: 22΅F 25V Electrolytic Capacitor
Q1: BC560C 45V 100mA PNP Transistor
Q2: BC550C 45V 100mA NPN Transistor
No comments:
Post a Comment