12 Volt Audio Amplifier Used IC TDA7222AP
This is the circuit diagram of a 6W audio power amplifier using the IC TA7222AP. IC TDA7222AP is an excellent integrated audio amplifier which can deliver 5.8W to a 4 Ohms load at 12V supply voltage. The IC has very good features like, muting function, low distortion, high ripple rejection, short circuit protection, thermal shut down etc. This amplifier can be operated from 8 to 12V and this makes it ideal for car radio applications.
This is the circuit diagram of a 6W audio power amplifier using the IC TA7222AP. IC TDA7222AP is an excellent integrated audio amplifier which can deliver 5.8W to a 4 Ohms load at 12V supply voltage. The IC has very good features like, muting function, low distortion, high ripple rejection, short circuit protection, thermal shut down etc. This amplifier can be operated from 8 to 12V and this makes it ideal for car radio applications.
Skema Rangkaian 12 Volt Audio Amplifier IC TDA7222AP
Note
- Use 12V DC for powering the circuit.
- The IC must be heatsinked.
- Speaker can be a 4 ohms one.
- For optimum performance input and output must be separately grounded.
TA7222AP pin out
Pin Name Description
1 Vcc Supply Voltage
2 RR Ripple Reject
3 MC Muting control
4 OP AF Signal Input
5 FB FB Filter
6 GA Gain adjust
7 GND Ground
8 GND Ground
9 OP AF Output
10 BS BootStrap
.
No comments:
Post a Comment